Site Tools


vehical_ecu_simos_1963

VehiCAL ECU

Concept

The VehiCAL ECU is a solution for tuning Continental Simos 19.63 (or 19.6 H80) ECU's found in new 2024- MQB vehicles such as:

  • VW Golf R/GTI Mk8.5
  • 8Y.2 Audi S3
  • Skoda Octavia RS
  • Cupra Formentor
  • and others…

The solution is the result of a collaborative effort on behalf of VehiCAL, Tangent Motorsport and TPE Europe GmbH.

There are three possible options:

  1. [Available] Purchase a new unlocked plug and play ECU. Shipped world wide from VehiCAL EU.
  2. [Available] Send your ECU for unlocking to TPE Europe GmbH in Germany. The ECU does not have to be opened.
  3. [Coming Soon] Send your ECU for unlocking to Tangent Motorsport/EFI Motorsport/VehiCAL. The top cover of the ECU has to be removed prior to sending the ECU. A new cover is provided with each unlock. The unlock will be possible in Asia (Tangent Motorsport), North America (EFI Motorsport) and Europe (VehiCAL).

Regardless of the method chosen - the tools and base ROM are provided by VehiCAL.

Pricing

The price for a new ECU is 1384 EUR excl. VAT and shipping.
When paying via bank transfer there is a discount, and the price is 1350 EUR.

The price for the mail-in unlock at VehiCAL EU will be 667 EUR excl. VAT and shipping once available.
When paying via bank transfer there is a discount, and the price will be 650 EUR.
TPE Europe, Tangent Motorsport and EFI Motorsport might have slight variations in price.

Included in the price are:

  • New ECU (if ordered)
  • Unlock fee
  • VehiCAL Flash license, which enables virtual read, flashing of the calibration with automatic checksum and CVN correction, and updates as new features are added. Requires a BMW ENET Cable. SFD2 unlock is not needed.
  • Rapid flashing - The flash time is approximately 1 minute and 20 seconds for the update flash and 20 seconds for calibration.
  • Patch for advanced logging and LIVE for VehiCAL Logger.
  • Torque bypass patch for the gearbox, preventing the gearbox from limiting the maximum torque.
  • End-to-end master/slave encryption for VehiCAL Pro users.
  • In case of a new ECU it remains fully swappable at any time to the original, e.g. for diagnostics or dealer visits.

Ordering

This service is strictly B2B. It is not provided to end customers (consumers) and VehiCAL will not be providing any calibrations or “OTA tunes”. In EU a valid VAT ID is required for the order and the ECU will be shipped only to the company the VAT ID belongs to.

In case of a new ECU there are two options:

  1. The car can be identified before ordering, in which case you will receive a plug and play ECU (see below).
  2. The car may be identified just before the installation of the ECU. In this case the new ECU will require an Update via VehiCAL Flash immediately after installation.

To avoid delays, you should always supply the correct VIN at the time of the order. The VIN can be changed afterwards, but it will require a support e-mail.

New ECU orders are placed in VehiCAL Billing shop.

For TPE Europe GmbH mail-in (without opening the ECU), check out here: TPE Europe GmbH webshop

Usage

flash_live.png

  1. Make sure you have a BMW ENET cable.
  2. Download and install VehiCAL Flash.

The following functions are available in VehiCAL Flash:

  • Ident - Identify the ECU and show details.
  • Upload ECU Data - Uploads the data from the original ECU to the server. Only required for a new ECU. For mail-in unlock this is done for you automatically by the unlock provider.
  • Virtual read - Read the original calibration file from the server. For VehiCAL Pro users this read is encrypted.
  • Write maps - Write a modified calibration file to the ECU (checksums are corrected automatically).
  • Clear DTC - Broadcast a DTC clear request to all controllers in the vehicle.
  • Enable LIVE tuning - Shows Ident whether LIVE tuning for VehiCAL Logger is enabled. To change it use Write maps.
  • Check for Update - Checks if an updated base ROM is available.
  • Update ECU - Installs an update (if one is available). Please note if the version has increased after the update, then you should make a new “Virtual Read” and transfer your changes to it. On a version mismatch the old virtual read will be refused to prevent bricking. An update also flashes the maps to stock, so you will have to re-flash the maps after.

An internet connection is required for any flash process or virtual read.

VehiCAL Pro

Flash Master

Pro users have access to the Flash Master tool, which allows to encrypt the flashed file with a public/private key system with a time limit. The file is encrypted end-to-end and decrypted only by the bootloader in the ECU.

Download and install: VehiCAL Flash Master.

flash_master_live.pngThe following functions are available:

  • Check - Checks if the API key is valid, user has a pro account and the subscription is active.
  • Decrypt - Opens an encrypted virtual read (.vread) taken from one of your assigned cars and saves the calibration as a .bin file.
  • Browse - Selects the calibration .bin file to package.
  • File expires after - Sets the file expiry. After the expiry it is no longer possible to flash the file.
  • Enable LIVE tuning - Enables LIVE tuning for VehiCAL Logger in the flash file.
  • Create Flash File - Creates the encrypted .vcal file, which you can send to any slave to flash.

Regardless of the time limit chosen, should you wish to immediately invalidate all files ever created, you may change your API key in VehiCAL Billing, which will make the files permanently undecryptable, even by VehiCAL.

Security

Your files are never transmitted to VehiCAL's servers. The server connection only provides the encryption material, no data is uploaded apart from your API key for authentication. The encryption is performed locally on your machine and the decryption by the bootloader in the ECU. The encryption keys are different for every file. It is not possible to dump your file by sniffing or hacking the flashing application due to the usage of public key cryptography.

Custom Code and Flash tool integration

PRO users may implement their own custom code modifications to the controller. Dedicated code, RAM and calibration zones are provided. Virtual reads contain the calibration modifications, and all provisioned cars automatically get the custom code software.

We can help companies with own flash tools to integrate their tools with the VehiCAL ECU, providing a white-label solution.

Please contact support for further details if you require access to these features.


Page Tools